Lateral Arm Polishers

Ideal for Higher Volume Production.

Larsen’s design optimizes simplicity of operation and absolute control for polishing concave, convex and plano surfaces. We have adapted our “Bridge Technology” to make the new P603 model. Set the polishing pin once and forget it. It automatically compensates for variations in lens and lap height. Triple-sealed spindles assure long life. High quality motors and the stainless steel and aluminum construction provide a lifetime of reliability. The six minute timer features midcycle memory, the round belt drive minimizes noise and vibration, and a clear console cover acts as the start switch and protects the controls.

The six spindle model is ideal for higher volume production, while the two spindle model is ideal for economy and more individual control of spindles. Optional features include an oscillation dial indicator, four inch deep splash tray with drain, choice of spindle taper, timing belt drive, and a slurry feed system.

 

SPECIFICATIONS
Patent Number 4525954

Six Spindle Model P-603
Eliminates tooling height adjustments for extremely consistent results.

Power: ……………. 110 volt AC, 2 amp, 60 Hz
Spindle Speed: ……………………. 0-2000 rpm
Oscllation Speed: ………………… 0-100 spm
Stroke Range: …………………. .5” (12.7 mm)
Digital Timer: ……………………. Programmable in seconds, minutes or hours of cycle time
Service Timer: ……………… 0-99,9999 hours
Weight: …………………………. 55 lbs (25 Kg)
Size: ……………………………. 21” x 15” x 10”
(520 mm x 380 mm x 250 mm)

Two Spindle Model P-201

Spindle Speed: ……………………. 0-2000 rpm
Weight: …………………………. 25 lbs (12 Kg)
Size: ……………………………. 10” x 10” x 15”
(250 mm x 250 mm x 380 mm)

Other specifications same as above

Six Spindle Model P-602

Conventional model with independent arms.

Lateral Arm Polisher PDF

Larsen Equipment Design. Copyright 2015. All rights reserved.

Website Design and Management ~ Travis Design Associates, Seattle